Clueboard 66% PCB - Version 2.5.1

IMGP3768-2.jpg
IMGP3767-2.jpg
1489095816841.png
IMGP3768-2.jpg
IMGP3767-2.jpg
1489095816841.png

Clueboard 66% PCB - Version 2.5.1

from 49.99
RGB Underlight:
Quantity:
Add To Cart

Arguably, the most important part of a keyboard is the PCB. It's what actually dictates which button does what, and it's what sends the data from each button to the computer. This PCB is the heart and soul of the Clueboard, and what allows you to completely customize any key you want on this keyboard. The Clueboard a 66% fully progammable PCB which allows for the use of MX switches or Alps switches, and  ANSI, ISO or JIS layout, as well as a custom layout allowing for a total of 72 keys. So, whether you're building a totally new Clueboard from scratch or re-purposing an old 66% keyboard, the Clueboard PCB is going to be the first thing you need. 

New Features on Version 2.5!

  • 1.5u mod support
  • Underlight closer to the edge

New Features on Version 2.5.1!

  • Offset 6U support
  • Offset Alps Enter support

Features

  • PCB Version 2.5
  • Bottom row footprints enable a wider variety of layouts.
  • LED indicator support for CapsLock
  • LED support for the Escape key and Page Up, so you can light up your artisan
  • LED support for the arrows
  • RGB Underlighting Support - Light up your desk!
  • Improve split shift support, you can do 1.25u/1u or 1u/1.25u on BOTH sides
  • Hacker Friendly! The TWC/i2c pins have been exposed to allow you to interface with custom hardware

Open Source!

The firmware that powers your Clueboard is open source, which means you can make your keyboard do anything you want it to! You can download the firmware source code here:

https://github.com/jackhumbert/qmk_firmware

Technical Notes:

  • Controller parts and diodes come pre-soldered
  • When Underlight: No is purchased the PCB will have pads for WS2812B LED's but they will not be installed 
  • When Underlight: Yes is purchased the PCB will come with WS2812B LED's pre-soldered